eitri

● Active

io.github.SiddhuYen/eitri

Hardware design with checks on every build: CAD, harnesses, motion, pneumatics, firmware, circuits

Connect this server

One click to install, or copy the config below. Suits: Claude Desktop · Cursor.

Add to Cursor Add to VS CodeClaude Desktop / Claude Code: paste the config below.

Or add it manually — claude_desktop_config.json (Claude Desktop) or .cursor/mcp.json (Cursor):

{
  "mcpServers": {
    "eitri": {
      "command": "uvx",
      "args": [
        "--python",
        "3.12",
        "eitri-hardware",
        "mcp"
      ]
    }
  }
}
One line, from the terminal
Claude Code
claude mcp add eitri -- uvx --python 3.12 eitri-hardware mcp
OpenAI Codex CLI
codex mcp add eitri -- uvx --python 3.12 eitri-hardware mcp
VS Code
code --add-mcp '{"name":"eitri","type":"stdio","command":"uvx","args":["--python","3.12","eitri-hardware","mcp"]}'

Syntax from each client's docs (Claude Code: claude mcp add; Codex: codex mcp add; VS Code: code --add-mcp). Placeholders in angle brackets are values you fill in.

A starting point — check the repository for exact arguments and setup. Restart your client after editing the config.

Category
IoT & Devices
Version
0.9.3
Registry
active
Published
11/20/2026
Listed in:Official MCP registry ↗how this is checked

Is it safe? Is it maintained?

Serverdex check: Nov 22, 2026

Mostly fine: eitri is maintained.

Maintained
Active
Last commit 2 days ago (Nov 19, 2026), 0 open issues.
Official registry
Active
Published as io.github.SiddhuYen/eitri in the official MCP registry, version 0.9.3.
Source
No licence found
Public repository, but GitHub reports no recognised licence (1 stars). Check the README before shipping it in a product.
Runs
On your machine
A local PyPI package started by your client; it can reach whatever your user account can.
Credentials
None declared
The registry entry declares no required environment variables.
Owner
Unclaimed
Nobody has claimed this page yet; the data above comes from the registry, GitHub and the live check.

Facts only: last commit and licence from GitHub, the entry's status from the official registry, credentials from the live check. Not a code audit — run the security scan on the endpoint yourself.

On GitHub

read Nov 21, 2026
Stars
1
Forks
0
Last push
Nov 19, 2026
License
Other

Python3d-printingagentaibuild123dcadclaudeopencascadetext-to-cad

From the README

eitri Use eitri inside Claude Code. One line installs it and registers the plugin: Then run claude and ask for a machine ("design a desk robot arm with three MG996R servos and an Arduino Uno"). No account and no API key: eitri runs on your computer, and your agent runs on your own Claude Code subscription. The default combined workspace designs a whole machine and checks its CAD, mechanism, wiring, firmware and circuit against each other on every build; every check names its source. • macOS and Linux; Windows is untested. Codex and Cursor get the same servers, but they are untested. • The plugin sends two anonymous counts (install, project created) and nothing else; eitri telemetry off stops them. • Source-available under FSL-1.1-MIT: each release becomes MIT two years after it ships. More about the plugin Or the app: a local AI CAD agent on your own Anthropic API key. Describe a part in plain language; eitri models it as a parametric build123d (OpenCASCADE) model, builds it, measures it against your request, looks at it, fixes what fails, and hands you STEP / STL / 3MF / GLB files. Then keep going in a Fusion-style 3D editor in your browser, by hand or by chat: both edit the same model. Plugin · Install the app · Limitations · License A real recorded session (the Wall racket holder demo, which anyone can replay without a key), played back in the editor: the plan, eitri writing the model, the failed builds, the fix, all 10 checks passing.…

Read the full README on GitHub →

The most-starred IoT & Devices servers in the index, with their live-check result.

ServerStarsLast pushLive check
Tapo MCP877Nov 2026Local / not checked
Bagel407Nov 2026Local / not checked
eda-agent375Nov 2026Local / not checked
Bambu Printer MCP359Nov 2026Local / not checked
KiCad MCP Pro232Nov 2026Local / not checked

eitri: questions people ask

Is eitri a remote or a local MCP server?
According to its entry in the official MCP registry, eitri ships as a local package (PyPI) that your client starts on your machine.
Is eitri safe to use?
Mostly fine: eitri is maintained. In detail — maintained: Active; official registry: Active; source: No licence found; runs: On your machine; credentials: None declared. Serverdex check of Nov 22, 2026. This is a reading of the repository, the registry entry and the live check, not a code audit; run the Serverdex security scan on the endpoint before trusting it with real data.
Is eitri still maintained?
Active: the repository's last commit 2 days ago. Last push Nov 19, 2026, 1 GitHub stars, Other licence. Read from GitHub on Nov 21, 2026.
How do I add eitri to Claude, Cursor or VS Code?
Copy the config in "Connect this server" into your client's MCP config file (claude_desktop_config.json, ~/.cursor/mcp.json or .vscode/mcp.json), or use the one-click Add to Cursor / Add to VS Code buttons and the one-line commands for Claude Code and Codex; then restart the client.
Browse all IoT & Devices →

Add the badge to your site

Show visitors that eitri is listed here — it’s also the link we check for a free listing.

eitri — listed on Serverdex

HTML — for your website

<a href="https://serverdex.io/server/io-github-siddhuyen-eitri?utm_source=badge"><img src="https://serverdex.io/brand/badge.svg" alt="eitri — listed on Serverdex" width="123" height="40" loading="lazy"></a>

Recommended. A dofollow link from your own domain is the one that counts for search engines, and it's the link we check for a free listing.

Markdown — for your README

[![eitri — listed on Serverdex](https://serverdex.io/brand/badge.svg)](https://serverdex.io/server/io-github-siddhuyen-eitri?utm_source=badge)

Nice for visibility, but GitHub marks README links nofollow, so it doesn't pass authority. Use the HTML badge on your site as well.

Add to CursorAdd to VS CodeOpen in Claude Code

Install buttons — for your README

[![Add to Cursor](https://serverdex.io/brand/install-cursor.svg)](https://serverdex.io/install/cursor/io-github-siddhuyen-eitri) [![Add to VS Code](https://serverdex.io/brand/install-vscode.svg)](https://serverdex.io/install/vscode/io-github-siddhuyen-eitri) [![Open in Claude Code](https://serverdex.io/brand/install-claude-code.svg)](https://serverdex.io/install/claude-code/io-github-siddhuyen-eitri)

One click opens Cursor or VS Code with this server's config prefilled; the Claude Code button lands on the one-line command. The links point at Serverdex, so when your config changes the buttons keep working.

Install buttons — HTML for your docs

<a href="https://serverdex.io/install/cursor/io-github-siddhuyen-eitri"><img src="https://serverdex.io/brand/install-cursor.svg" alt="Add to Cursor — via Serverdex" width="140" height="28"></a>
<a href="https://serverdex.io/install/vscode/io-github-siddhuyen-eitri"><img src="https://serverdex.io/brand/install-vscode.svg" alt="Add to VS Code — via Serverdex" width="147" height="28"></a>
<a href="https://serverdex.io/install/claude-code/io-github-siddhuyen-eitri"><img src="https://serverdex.io/brand/install-claude-code.svg" alt="Open in Claude Code — via Serverdex" width="180" height="28"></a>

Same buttons as plain links for a docs page or website.

Prefer a live badge with the score, stars and live check? Score badge (links to a page that explains the number and back to this listing).