myIO

● Active

io.github.SmarthomeNinja/myio-mcp

Read and control a myIO smart home controller: heating, lighting, blinds and energy.

Connect this server

One click to install, or copy the config below. Suits: Claude Desktop · Cursor.

Add to Cursor Add to VS CodeClaude Desktop / Claude Code: paste the config below.

Or add it manually — claude_desktop_config.json (Claude Desktop) or .cursor/mcp.json (Cursor):

{
  "mcpServers": {
    "myio-mcp": {
      "command": "npx",
      "args": [
        "-y",
        "myio-mcp@1.6.2"
      ],
      "env": {
        "MYIO_BASE_URL": "<your MYIO_BASE_URL>",
        "MYIO_USERNAME": "<your MYIO_USERNAME>",
        "MYIO_PASSWORD": "<your MYIO_PASSWORD>",
        "MYIO_WRITE": "config",
        "MYIO_SERVERS": "<your MYIO_SERVERS>"
      }
    }
  }
}
One line, from the terminal
Claude Code
claude mcp add --env MYIO_BASE_URL='<your MYIO_BASE_URL>' --env MYIO_USERNAME='<your MYIO_USERNAME>' --env MYIO_PASSWORD='<your MYIO_PASSWORD>' --env MYIO_WRITE=config --env MYIO_SERVERS='<your MYIO_SERVERS>' --transport stdio myio-mcp -- npx -y myio-mcp@1.6.2
OpenAI Codex CLI
codex mcp add myio-mcp --env MYIO_BASE_URL='<your MYIO_BASE_URL>' --env MYIO_USERNAME='<your MYIO_USERNAME>' --env MYIO_PASSWORD='<your MYIO_PASSWORD>' --env MYIO_WRITE=config --env MYIO_SERVERS='<your MYIO_SERVERS>' -- npx -y myio-mcp@1.6.2
VS Code
code --add-mcp '{"name":"myio-mcp","type":"stdio","command":"npx","args":["-y","myio-mcp@1.6.2"],"env":{"MYIO_BASE_URL":"<your MYIO_BASE_URL>","MYIO_USERNAME":"<your MYIO_USERNAME>","MYIO_PASSWORD":"<your MYIO_PASSWORD>","MYIO_WRITE":"config","MYIO_SERVERS":"<your MYIO_SERVERS>"}}'

Syntax from each client's docs (Claude Code: claude mcp add; Codex: codex mcp add; VS Code: code --add-mcp). Placeholders in angle brackets are values you fill in.

Environment variables
  • MYIO_BASE_URLrequiredURL of the myIO controller, e.g. http://192.168.1.178
  • MYIO_USERNAMErequiredmyIO user name; its permission level limits what the tools can do
  • MYIO_PASSWORDrequiredsecretPassword of the myIO user
  • MYIO_WRITEWrite level: state (switch only), config (also settings) or admin
  • MYIO_SERVERSsecretSeveral controllers: JSON array of {name, url, username, password}; overrides the three above

A starting point — check the repository for exact arguments and setup. Restart your client after editing the config.

Category
IoT & Devices
Version
1.6.2
Registry
active
Published
11/15/2026
Listed in:Official MCP registry ↗how this is checked

Is it safe? Is it maintained?

Serverdex check: Nov 17, 2026

Looks healthy: myIO is maintained, open source.

Maintained
Active
Last commit 7 days ago (Nov 15, 2026), 0 open issues.
Official registry
Active
Published as io.github.SmarthomeNinja/myio-mcp in the official MCP registry, version 1.6.2.
Source
Open source, MIT
Public repository under the MIT licence, 0 stars, 0 forks.
Runs
On your machine
A local npm package started by your client; it can reach whatever your user account can.
Credentials
4 required
Declared environment variables: MYIO_BASE_URL, MYIO_USERNAME, MYIO_PASSWORD, MYIO_SERVERS. They stay on your machine; the config on this page shows where each goes.
Owner
Unclaimed
Nobody has claimed this page yet; the data above comes from the registry, GitHub and the live check.

Facts only: last commit and licence from GitHub, the entry's status from the official registry, credentials from the live check. Not a code audit — run the security scan on the endpoint yourself.

On GitHub

read Nov 15, 2026
Stars
0
Forks
0
Last push
Nov 15, 2026
License
MIT

TypeScriptai-assistantarduinoclaudeclaude-desktopheating-controlhome-automationmcpmcp-servermodel-context-protocolsmart-hometypescript

From the README

myIO MCP Server Talk to your home. myIO MCP connects AI assistants such as Claude to a myIO smart home controller, so you can ask the house in plain words how warm the children's room is, what happened today, or to lower the blinds. myIO is a central home controller developed in Hungary by myIO Smart Home Zrt. It sits on a DIN rail in the distribution cabinet and runs heating and cooling, lighting, blinds, gates and energy in one system, on its own, without the internet. This is a free, open-source Model Context Protocol (MCP) server for it: it runs on your own computer and reaches the controller over your home network, through its HTTP API. Example A real conversation in Claude Desktop, translated from Hungarian: You: How warm is it in the house right now, room by room? Claude (used myIO-MCP): Right now (20:02), according to the controller: | Room | Temperature | |---|---| | Bedroom | 23.6 °C | | Bedroom bathroom | 23.3 °C | | Study | 26.0 °C | It is 5.3 °C outside, and the heating flow water is at 32.3 °C. The study is noticeably warmer than the others.…

Read the full README on GitHub →

The most-starred IoT & Devices servers in the index, with their live-check result.

ServerStarsLast pushLive check
Tapo MCP877Nov 2026Local / not checked
Bagel407Nov 2026Local / not checked
eda-agent375Nov 2026Local / not checked
Bambu Printer MCP359Nov 2026Local / not checked
KiCad MCP Pro232Nov 2026Local / not checked

myIO: questions people ask

Is myIO a remote or a local MCP server?
According to its entry in the official MCP registry, myIO ships as a local package (npm) that your client starts on your machine.
Does myIO need an API key?
Its registry entry declares 4 required environment variables: MYIO_BASE_URL, MYIO_USERNAME, MYIO_PASSWORD, MYIO_SERVERS. The config on this page shows where each goes.
Is myIO safe to use?
Looks healthy: myIO is maintained, open source. In detail — maintained: Active; official registry: Active; source: Open source, MIT; runs: On your machine; credentials: 4 required. Serverdex check of Nov 17, 2026. This is a reading of the repository, the registry entry and the live check, not a code audit; run the Serverdex security scan on the endpoint before trusting it with real data.
Is myIO still maintained?
Active: the repository's last commit 7 days ago. Last push Nov 15, 2026, 0 GitHub stars, MIT licence. Read from GitHub on Nov 15, 2026.
How do I add myIO to Claude, Cursor or VS Code?
Copy the config in "Connect this server" into your client's MCP config file (claude_desktop_config.json, ~/.cursor/mcp.json or .vscode/mcp.json), or use the one-click Add to Cursor / Add to VS Code buttons and the one-line commands for Claude Code and Codex; then restart the client.
Browse all IoT & Devices →

Add the badge to your site

Show visitors that myIO is listed here — it’s also the link we check for a free listing.

myIO — listed on Serverdex

HTML — for your website

<a href="https://serverdex.io/server/io-github-smarthomeninja-myio-mcp?utm_source=badge"><img src="https://serverdex.io/brand/badge.svg" alt="myIO — listed on Serverdex" width="123" height="40" loading="lazy"></a>

Recommended. A dofollow link from your own domain is the one that counts for search engines, and it's the link we check for a free listing.

Markdown — for your README

[![myIO — listed on Serverdex](https://serverdex.io/brand/badge.svg)](https://serverdex.io/server/io-github-smarthomeninja-myio-mcp?utm_source=badge)

Nice for visibility, but GitHub marks README links nofollow, so it doesn't pass authority. Use the HTML badge on your site as well.

Add to CursorAdd to VS CodeOpen in Claude Code

Install buttons — for your README

[![Add to Cursor](https://serverdex.io/brand/install-cursor.svg)](https://serverdex.io/install/cursor/io-github-smarthomeninja-myio-mcp) [![Add to VS Code](https://serverdex.io/brand/install-vscode.svg)](https://serverdex.io/install/vscode/io-github-smarthomeninja-myio-mcp) [![Open in Claude Code](https://serverdex.io/brand/install-claude-code.svg)](https://serverdex.io/install/claude-code/io-github-smarthomeninja-myio-mcp)

One click opens Cursor or VS Code with this server's config prefilled; the Claude Code button lands on the one-line command. The links point at Serverdex, so when your config changes the buttons keep working.

Install buttons — HTML for your docs

<a href="https://serverdex.io/install/cursor/io-github-smarthomeninja-myio-mcp"><img src="https://serverdex.io/brand/install-cursor.svg" alt="Add to Cursor — via Serverdex" width="140" height="28"></a>
<a href="https://serverdex.io/install/vscode/io-github-smarthomeninja-myio-mcp"><img src="https://serverdex.io/brand/install-vscode.svg" alt="Add to VS Code — via Serverdex" width="147" height="28"></a>
<a href="https://serverdex.io/install/claude-code/io-github-smarthomeninja-myio-mcp"><img src="https://serverdex.io/brand/install-claude-code.svg" alt="Open in Claude Code — via Serverdex" width="180" height="28"></a>

Same buttons as plain links for a docs page or website.

Prefer a live badge with the score, stars and live check? Score badge (links to a page that explains the number and back to this listing).